Page 1 of 1
rear sway bar bolt size? GQ
Posted: Wed Aug 18, 2010 4:06 pm
by 4wd_pig
I'm after the bolts size and length for the bolts connect the rear sway bar to the bracket on the diff?
i have tried all different size bolt from metric, unc, unf etc and nothing fits the tread for the square nut that is welded on the inside.
Re: rear sway bar bolt size? GQ
Posted: Wed Aug 18, 2010 6:28 pm
by ssfabricator
Everything on a gq is metric fine
hope this helps
Re: rear sway bar bolt size? GQ
Posted: Wed Aug 18, 2010 6:36 pm
by coxy321
Have you tried running a tap or thread cleaner through it first, just incase its dirty/damaged/rusty?
Re: rear sway bar bolt size? GQ
Posted: Wed Aug 18, 2010 8:42 pm
by 4wd_pig
i tried a metric fine thread but had no luck. ill run a tap through it tomorrow if i can get my hands on one.
thanks for your help.
Re: rear sway bar bolt size? GQ
Posted: Thu Aug 19, 2010 6:38 pm
by GUEEY
M10 x 1.25 pitch, bolts about 25mm long 14mm hex
Grant.