Outer Limits 4x4 Board

hi all, got myself an ARB winch bar with WARN high mount winch for $400, just wanting to know were you buy parts for the winch, all solenoids have rusted terminals, stopping it from working, and its missing hand controller, cheers

Not sure on the controllers, but I'm fairly sure you can get sealed solenoids from Paul at Tigerz 11 which will fit Warn control boxes.

can you not clean the terminals and put it back together?

luvathemud wrote:hi all, got myself an ARB winch bar with WARN high mount winch for $400, just wanting to know were you buy parts for the winch, all solenoids have rusted terminals, stopping it from working, and its missing hand controller, cheers

Im guessing ARB sell the parts too?

Bazzle

run 1 of those tigerz solinoids under the bonnet , then in cab switch.

Piss off the Warn stuff (Sols & Controler)

Contact Ben @ Tigerz11 or go to a Tigerz supplier - http://www.tigerz11.com.au/distributors.html

I had the same issue and got a new solenid, control box and handcontroler direct from Ben for less than anything Warn can supply ($175)

Warn stuff is way to expensive for what it is......
I got quoted $660 for a bare control box
Hand controler for $150....
Sols $50 each and i would need 4 of them.....

The days of Warn being the best are very quickly going, if they have not already...

x boggetyteen

Go and give the guys at Tigerz11 a call. Good and cheap!

Sounds rooted... I'll give you your 4 hunjy back and take it off your hands....

I just put a Tigerz solenoid on my low mount. Easy to install and well priced.

Couldn't find too much info but are these the Titan solenoids?

Dave.