Outer Limits 4x4 Board

Anyone planning on ever re-buidling a Nissan T/Case for different gears or whatever, cut & paste this so you can buy all the shit before you start.
I got oil in my eye holding one of the seals up to the light to read the miniscule numbers off of it, so be grateful
Don't bother with Nissan, they won't sell the individual bearings to anyone off the street, only a full t-case reco kit ($)

Bearings:
6212NC3 (NTN)
6208C3 (NTN)
TM207 (NSK)
6306 (2x) (NTN)
6208ZC3 (NTN)
6213Z (NSK)
Seals:
15 Z 50 72 12 AE (Input)
15 Z 50 72.5 19.5 AE (Rear output)
15 Z 40 75 17.9 AE (Front output)

EDIT: Had the rear output diameter wrong. changed from 60mm to 50mm

i just went thru the same when fitting rockhoppers


nissan wanted $600 for the input and output bearings alone.


got a full kit cheaper than that from melbourne

now have totally new tcase

Another quick thing..
6213Z - this bearing is the big fawker. Make sure to get the one with the circlip groove in it, cause otherwise you will spend the rest of your time on this planet trying to get the end float right to no avail. I got the wrong one, and haven't eaten in weeks, cause I wouldn't let it beat me

They are listed under the same part# in most catalogues

Wendle wrote:Another quick thing..
6213Z - this bearing is the big fawker. Make sure to get the one with the circlip groove in it, cause otherwise you will spend the rest of your time on this planet trying to get the end float right to no avail. I got the wrong one, and haven't eaten in weeks, cause I wouldn't let it beat me

They are listed under the same part# in most catalogues

you look very thin and frail

i suggest you get those girls who clean your driveway to cook you a decent meal do not send them to cooma, as wazza is on to thier scam!

handy numbers