Page 1 of 1
Lightforce 240XGT and ARB GQ non-winch bar
Posted: Fri Jun 25, 2004 8:04 am
by blkmav
Will the 240XGT fit an ARB GQ non-winch bar?
Posted: Fri Jun 25, 2004 8:18 am
by MYTTUF
I think you can make anything fit but can tell you that a mate has an ARB non winch bar with winch and the older style 240's fit. The diff between the older and the XGT is at the back and I think that would not make a difference in your situation. I think they now have 2 styles of mounting brackets too. Best to check at the shop before you hand over your cash. They sat out too far on the 80 so I settled for the 170 and couldn't be happier.
Posted: Fri Jun 25, 2004 9:11 am
by Daisy
XGT's have a mount system which is also reversible to extend the lights out a bit further to allow fitment on some bars where the hoop is a little low.
But if it doesnt, then it wont cost much to take the bar to get it modified to have the light mounts moved forward a bit or redrilled (yourself if you are capable)
My XGT's didnt mount on either the TJM non winch alloy bar or even the steel TJM winch bar so i ended up sellin both of em and buyin a cheezy bar instead.