Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2F 5peed conversion ???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2
Joined: Sun Jan 17, 2010 9:33 am
Location: Ipswich QLD

2F 5peed conversion ???

Post by mud boy »

can i bolt a 5speed up to a 2F petrol in a FJ45
thanks
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: 2F 5peed conversion ???

Post by RAY185 »

Sure.

Have a search. This has been covered quite a few times so there's a lot of info for you to read if you can find it.
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Re: 2F 5peed conversion ???

Post by brentz »

same bellhousing bolts striaght up
brentz
TUF-60 starting build soon
Posts: 2
Joined: Sun Jan 17, 2010 9:33 am
Location: Ipswich QLD

Re: 2F 5peed conversion ???

Post by mud boy »

so which 5 speed is the same bell housing as the 2F
Posts: 280
Joined: Tue Feb 16, 2010 1:21 pm
Location: Werribee

Re: 2F 5peed conversion ???

Post by MrGrim »

h55F most 60 series 5 speed goes straight up to the 4 speed bell unless you have an early bell the it wont fit as the lower part of the opening is to small
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: 2F 5peed conversion ???

Post by RAY185 »

Any 40/60/75 series 5 speed will bolt up as long as it was from a 6cyl motor and it's build date is the same as yours or newer. But the bellhousing is pretty much where the "bolt up" part ends. You will need different tailshafts, a crossmember, shifter positions are different, no handbrake drum on the back of 5 speeds so you'll need to sort out a handbrake mechanism. There may be more that I'm forgetting.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest