Page 1 of 1

transfer case 80 series wah

Posted: Fri Sep 03, 2010 5:52 pm
by kean80cruise
Hi,

My poor 80 series has a major problem, its only 2wd!

The problem has been diagnosed as something in the transfer case.

I have been qouted $1000 to take it apart and rebuild it, then whatever is wrong with it i will have to buy parts etc.

My question is,

Is it easy to take out screw around with or whatever, or can I buy a reconditioned one or should i bite the bullet and get it done.
My concern is if they take it apart, its totally effed and i payed 500 bucvks for nothing.
any help would be appreciated or advise.

Thanks

Kean

Re: transfer case 80 series wah

Posted: Fri Sep 03, 2010 10:40 pm
by dow50r
Kean, i have a good one in wollongong...you may be able to get one closer to home...better to buy one working and bolt it in, then save the $$ 300 max is the going price

Re: transfer case 80 series wah

Posted: Sat Sep 04, 2010 11:08 am
by kean80cruise
300 for the transfer case? or 3000"? sorry i never bought one before.
Just wandering does it have to be a 80 series transfer case?
Can you drive the car without it if you take it out to repair?
How big is it and how do I know yours is working AND are they easy to install :D

More info would be much appreciated.

Kean

Re: transfer case 80 series wah

Posted: Sat Sep 04, 2010 11:29 am
by Ice
$300, no you cant drive the car without it

they weigh a bit easy enough to bolt on if you have somone help you do it

Re: transfer case 80 series wah

Posted: Sun Sep 05, 2010 9:49 pm
by stilivn
Open it up and have a look. Not too hard to do if not your daily driver. If its in the rear part maybe fitting a part time kit, 600 bucks max could be a fix if your lucky, If not its only taken a day of your time.