Outer Limits 4x4 Board

I am after the measurements of a rear diff out of a IFS hilux. I am working on a hotrod at the moment and it has a early model hilux rear diff at the moment but the owner want a wider rear end. So im thinking of a later rear diff and some measurements would be great befor i go out and buy one.

Mark.

the housing is 1330mm flange to flange, from memory about 50mm wider track

Std beam axle front - 55" or 1395mm (WMS to WMS)
IFS rear diff - 58" or 1470mm (WMS to WMS)
05 and on IFS rear diff - same width as 80 series Cruiser