Page 1 of 1
after info or pic were people drilled to pass ecu loom
Posted: Wed Sep 15, 2010 5:35 pm
by bundy4x4
i'm after some info of pic of where to put the hole for the holden ecu loom through the firewall i have a 85 hilux if someone got pic it would be great
Re: after info or pic were people drilled to pass ecu loom
Posted: Wed Sep 15, 2010 8:53 pm
by old fella
you normally put it through passanger side straight under bonnet hinge and as close to top of inner guard., need to remove glove box first before you drill with hole saw,it's easer to remove big rubber gromet from wire loom and use smaller one, less size hole. not much room for computer behind glove box.