Outer Limits 4x4 Board

I haven't had any luck finding a Ram style 4" snorkel head for my custom set up. I'm in Canada but just a short drive to the USA. Seems like a few of you guys in Australia run them, any idea where I could find one?

I had the Safari on my previous truck and really liked it, kept the intake dry in heavy rain.

Thanks!
Mr D.

Try ebay.

They are relatively cheap here, if you want, I could post one to you.

Queensland Diesel Spares have them.

Truck spare parts stores should stock them.
I got my 3in snorkel head from a truck spares shop, Im sure they had 4in heads too.

Here: http://www.truckbitsaust.com.au/PDF/Air%20Inlets.pdf" onclick="window.open(this.href);return false;

Bazzle

I would be surprised if there isn't someone in your area that doesn't have Donaldson filters and their other products. They make snorkel heads for trucks and may have some as small as 4".

Cheers for the info!

3.5" is the largest I've found on ebay. Those on the link look like the Donaldson unit with louvers but their angle is 90* unlike the Safari unit that have a more pronounced angle... which works better for my application.

bj on roids, which 4" snorkel head do you have access to? I might consider your offer...

Thanks again!

Mr D.

Abitibi wrote:Cheers for the info!

3.5" is the largest I've found on ebay. Those on the link look like the Donaldson unit with louvers but their angle is 90* unlike the Safari unit that have a more pronounced angle... which works better for my application.

bj on roids, which 4" snorkel head do you have access to? I might consider your offer...

Thanks again!

Mr D.

Just the 90 degree ones.
If you are making a custom pipe just add more bend up near the top so you can run a straight ram head.