Moisture in Air Cleaner Cover
Posted: Sun Jun 27, 2004 2:01 pm
Hi,
Was inspecting the main air cleaner (NOT Precleaner) yesterday, and noticed that there appeared to be some moisture inside the housing, which seemed to be very greasy. Then inspecting into the neck, where the housing attached to the engine, there seemed to be a lining of grease around the join. Does this sound OK, or should all the internals of this cover be bone dry?
I have been through some water lately, but not high enough to get into engine, and the filters are a little dirty, but not really any sign of water.
Thanks
Andrew
Was inspecting the main air cleaner (NOT Precleaner) yesterday, and noticed that there appeared to be some moisture inside the housing, which seemed to be very greasy. Then inspecting into the neck, where the housing attached to the engine, there seemed to be a lining of grease around the join. Does this sound OK, or should all the internals of this cover be bone dry?
I have been through some water lately, but not high enough to get into engine, and the filters are a little dirty, but not really any sign of water.
Thanks
Andrew