Page 1 of 1
JD2 bender
Posted: Thu Sep 30, 2010 5:39 pm
by johno88
Im about to buy a model 3 bender just wondering what size die in inches i need for 32nb with 3.2mm wall thickness?
thanks in advance
Re: JD2 bender
Posted: Thu Sep 30, 2010 7:30 pm
by Harb
if you are buying from OPW pete will have the right die for you.....
Re: JD2 bender
Posted: Fri Oct 01, 2010 8:01 am
by 351ciofgrunt
johno88 wrote:Im about to buy a model 3 bender just wondering what size die in inches i need for 32nb with 3.2mm wall thickness?
thanks in advance
I bought an australian metric bender (speedwerx), didn't realise you could buy metric dies for the american bender.
Re: JD2 bender
Posted: Fri Oct 01, 2010 9:35 am
by Slunnie
johno88 wrote:Im about to buy a model 3 bender just wondering what size die in inches i need for 32nb with 3.2mm wall thickness?
thanks in advance
Its actually a 32NB die set. The OD is something weird like 42.7mm or something like that, but Pete has 32NB die sets which you can buy.
Re: JD2 bender
Posted: Fri Oct 01, 2010 4:30 pm
by Tuff Events
Thanks guys, that is correct.
I carry all common metric & imperial die sets in stock..
Give me a buzz tomorrow or check this link out.
http://opw.com.au/_backup/fabrication.html" onclick="window.open(this.href);return false;
All details on there.
Cheers
Re: JD2 bender
Posted: Sun Oct 03, 2010 8:30 am
by Screwy
Just for your interest....
I have bought mine from Pete.
I have an inch and a half and an inch and 3/4 die.
The inch and 3/4 die is only slightly bigger then the 32NB die, ( i think maybe 1mm ). Use this to bed up my 32NB black pipe bits and peices and you cant even notice an ovaling at all.
Screwy