Outer Limits 4x4 Board

I have just installed a jks body lift to my tj wrangler and now when in low range it jumps out unless u hold it there
what is the easy way to fix this but 4wd high is fine and 2wd

and i know the easy way of fixing it not using low rang but i want to use low range

If you look at the linkage there is a small plastic block with a bolt in it - this is intended for adjusting the shifter.
If that doesn't work to your satisfaction then the ideal solution is to ditch the crappy factory design that mount half on the body & half on the t/case - to a kit like one from SkyJacker that mounts purely from the transfer case.

Thank you Wooders
that did the trick was a little bit of fiddle n around now to just test it on the weekend