Page 1 of 1
TD42 INJECTOR PUMP MODS
Posted: Tue Oct 05, 2010 10:54 am
by MILLSY
HI ALL, I,VE HEARD ITS POSSIBLE TO FIT A 1HZ 12MM PLUNGER INTO A TD42 PUMP TO SUPPORT APPROX 220KW. ANYONE DONE THIS MOD OR KNOW WHAT IS INVOLVED IN DOING IT?
CHEERS, MILLSY
Re: TD42 INJECTOR PUMP MODS
Posted: Tue Oct 05, 2010 11:08 am
by turps
I doubt many people will let you in on the secrets. I have heard it is the same as whats in the 1hd-FTE injector pump.
Re: TD42 INJECTOR PUMP MODS
Posted: Tue Oct 05, 2010 2:12 pm
by Dzltec
There is a lot involved. A 1hz head and rotor is 10mm in diameter not 12. As for the recipe, I won't give it out. You are asking alot to make 220rwkw, it won't be just a pump that is needed to get it there.
good luck
Andy
Re: TD42 INJECTOR PUMP MODS
Posted: Tue Oct 05, 2010 6:58 pm
by MILLSY
CHEERS FELLAS, DZLTEC, DO YOU DO THIS MOD AND IF SO, HOW MUCH? I'LL SUPPLY BOTH PUMPS.
Re: TD42 INJECTOR PUMP MODS
Posted: Tue Oct 05, 2010 7:12 pm
by Tomo_89
quite an easy mod.. simply remove both pumps, remove head from pump along with the plunger and switch the two then bolt back together and then place it on your squillion dollar test bench and set it up
or you could just pay dzl tech for a complete new pump tuned to what ever hp you want.
Cheers