Outer Limits 4x4 Board

In finding parts for my 32/36 weber,I'm after a cover assembly.
Any ideas

The bit with the circle around it is the bit i need




regards
james

Try auto spares galore in ferntree gully Vic.
Pretty sure they post stuff.
0397583644

Dan

It looks like you need Weber part no. 32486.076 , according to http://www.piercemanifolds.com/category_s/322.htm" onclick="window.open(this.href);return false;

Common to other webers I think: http://www.carburetion.com/Weber/invtoc ... =32486.076" onclick="window.open(this.href);return false;

Just guessing but I wouldn't be surprised if it were cheaper to get it posted from the US than to buy it here... worth checking anyway.

chimpboy wrote:It looks like you need Weber part no. 32486.076 , according to http://www.piercemanifolds.com/category_s/322.htm" onclick="window.open(this.href);return false;

Common to other webers I think: http://www.carburetion.com/Weber/invtoc ... =32486.076" onclick="window.open(this.href);return false;

Just guessing but I wouldn't be surprised if it were cheaper to get it posted from the US than to buy it here... worth checking anyway.

Thanks chimp

recarb on the sunny coast will have what you want.

http://www.recarb.com.au/" onclick="window.open(this.href);return false;

When i worked there many many moons ago they where reasonably priced. Not sure now thou.

that looks like the standard ford cortina/escort 2lt -1.6 carb.
but not from the cortina mkII as thats a 32/36dgv
oh and that part is the high pump actuator

i also might have a couple of these in the shed ..pm an ill have a look youd be welcome to 1

MrGrim wrote:that looks like the standard ford cortina/escort 2lt -1.6 carb.
but not from the cortina mkII as thats a 32/36dgv
oh and that part is the high pump actuator

i also might have a couple of these in the shed ..pm an ill have a look youd be welcome to 1

Thanks mate, its a dagv mk2,2ltr going on a mk2 1.6 hope you have one
regards
James