I am looking to refine the filling of the two tanks I have fitted to my Range Rover. I currently have a separate fill point for each tank and would like to reduce this to just one. I understand that some Toyotas have a single filler point and a lever selection allowing for fuel to be delivered to Main or Aux. I'd appreciate some help identifying the parts I need.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fuel Filler with dual tanks
Moderators: toaddog, Elmo, DUDELUX
Fuel Filler with dual tanks
Michael T
Aussie '88 RR Tdi300 Auto
Aussie '88 RR Tdi300 Auto
Re: Fuel Filler with dual tanks
The prado's have the split filler to fill either tank from the one place.
Can't imagine it being expensive from wreckers..
Brad
Can't imagine it being expensive from wreckers..
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Resident Terrorist
Re: Fuel Filler with dual tanks
The lever actuated one you describe was in the 80 series cruisers.
Re: Fuel Filler with dual tanks
correct.RAY185 wrote:The lever actuated one you describe was in the 80 series cruisers.
the 100 and 105series cruiser has one fuel cap, but inside the filler neck it widens out and there is two openings, one for filling the main tank and one for filling the sub tank.
it would be fairly easy to fab something similar, or as above source from the wreckers
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: Fuel Filler with dual tanks
Thanks for the help, you have given me a couple of options.
I'll have a look at a couple of 'original' solutions, and like the idea of fabricating something. At least with the fabrication, it will all look standard from the outside.
I'll have a look at a couple of 'original' solutions, and like the idea of fabricating something. At least with the fabrication, it will all look standard from the outside.
Michael T
Aussie '88 RR Tdi300 Auto
Aussie '88 RR Tdi300 Auto
Who is online
Users browsing this forum: No registered users and 3 guests