Page 1 of 1
Sweet JD2 mounting idea
Posted: Wed Oct 20, 2010 5:36 pm
by bru21
Having 8 holes allows the bender to index at 45 degrees.
I'm sure others have had this problem
cheers bru
http://www.ruclip.com/video/gg_kfBb0WaM ... adcom.html" onclick="window.open(this.href);return false;
Re: Sweet JD2 mounting idea
Posted: Wed Oct 20, 2010 6:39 pm
by AFeral
Good idea i like it. Will have to sneak one onto the plasma cutter at work soon i think
Re: Sweet JD2 mounting idea
Posted: Wed Oct 20, 2010 11:23 pm
by brooksy
I remember seeing that on Pirate but as I don't have the model 3 I forgot about it. Definately a handy investment as the mobility issue was one of the reasons I went with the model 4.
brooksy
Re: Sweet JD2 mounting idea
Posted: Thu Oct 21, 2010 9:08 am
by ausyota
Looks like a simple solution.
P.S. that website just gave me a virus!
Re: Sweet JD2 mounting idea
Posted: Thu Oct 21, 2010 10:22 am
by WICKED
NSFW On that website!!!
Seriously were the FARK did you get that link from bru?!?!?! Mine was full screen.....32" monitor! I saw the side scroll link's
Re: Sweet JD2 mounting idea
Posted: Thu Oct 21, 2010 10:39 am
by bru21
I searched for model 4 mounting plate - to see if I could order one rather than buy a 3/4 drill.
That came up. It is pretty random I admit.
Its a pity on the model 4 you can't zero the degree wheel.
That will certianly bite me at some stage.
That and the fact the 4 is about half as strong as the 32 - I probably should have gone that way.
It is a sweet bit of kit though and I do like the idea of no U clamp to expand out if the pin is not engaged - although I have not yet bent anything on it.