Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

anyone got simex mp trekkers?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 6
Joined: Wed Oct 20, 2010 5:00 pm
Location: maffra vic

anyone got simex mp trekkers?

Post by meataxe »

Ok well i picked up a set of trekkers near new cheap cheap and have found that they are hard as and not very grippy.Im not sure of what air preasure i should run off road and have been told they are 2 skinny and wont bag out much and i should go for a wider tyre.If anyone has any tips that would be great cheers.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Re: anyone got simex mp trekkers?

Post by coxy321 »

What size are the tyres?
What size are the rims?
What car are they on?
What pressures have you tried?

More info in your post will mean less questions getting fired back. ;)
Posts: 6
Joined: Wed Oct 20, 2010 5:00 pm
Location: maffra vic

Re: anyone got simex mp trekkers?

Post by meataxe »

7.50 i6 on 16x6 rims on a 96 d21 nav single cab not sure on preasure think 35 psi havent tried dropping as im not 2 sure how low 2 go
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Re: anyone got simex mp trekkers?

Post by Gwagensteve »

35psi? :shock:

Golly. Try half that. I bet you don't find them as hard and find them quite grippy.

@ 17 psi they should stay on the rims fine but will work eleventy times better.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Re: anyone got simex mp trekkers?

Post by alien »

not sure what the MP trekker is like, but my ETs on the sierra, even at 7psi still hardly bag on the sidewalls - they do get longer though. just cos the sidewall isnt physically appearing to bag out doesnt mean the tread hasnt gotten way longer.

They are a very stiff tyre though! at that 7psi with all the zuks weight on 1 tyre (dont ask, it was a scary situation) it only compressed the rubber half way to the rim (sidewall bagging).

I also have to run tubes in mine, as the bead tends to inhale mud and gravel at an incredible rate and cause slow deflation. Well, by slow, i had one go from 20psi to about 3 psi overnight.
The worst thing about censorship is ███████.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Re: anyone got simex mp trekkers?

Post by coxy321 »

Just for reference, i run my 35x11.5R15's at 40psi on road, and 16-18psi off road.

I'd say you just need to get out there and have a play with different pressures, but remember not to try land speed records with a low tyre pressure.
Posts: 59
Joined: Mon Jun 14, 2010 3:35 pm
Location: Erina

Re: anyone got simex mp trekkers?

Post by Mr Termite »

Also, lowering tyre pressures is not so much about bagging them out (east-west) but increasing the track (north south). The two work hand in hand, but there are variances in different brands as to how much.

Seriously, everyone's an 'expert'.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest