Page 1 of 1
gu diff ?
Posted: Tue Oct 26, 2010 7:02 pm
by drysie.
will a 4.1 rear gq diff centre fit a gu rear that was a 2.8 4.6 centre? thanks
Re: gu diff ?
Posted: Wed Oct 27, 2010 5:46 pm
by toughnut
There were only 2 different diffs available on both models. Its the size of the diff housing that is different. So if its the same diff then you can swap the centers to your hearts content.
Re: gu diff ?
Posted: Thu Oct 28, 2010 12:41 am
by beast of a GQ
I went 4.6 centres out of a GQ 2.8 into my 04 model GU 3L. It was a simple swap just had to swap the flanges over. Just one big nut. easy as. Just make sure the housing are the same size and everything will be easy as.
Cheers,
Shane
Re: gu diff ?
Posted: Thu Oct 28, 2010 5:56 am
by mud4b
yeah you would need the h233 diff (smaller) if its a gq center going in, these are the most common anyway. does that mean your selling a rear 4.6 center?
cheers mark.
Re: gu diff ?
Posted: Sat Oct 30, 2010 9:08 am
by thehanko
beast of a GQ wrote:I went 4.6 centres out of a GQ 2.8 into my 04 model GU 3L. It was a simple swap just had to swap the flanges over. Just one big nut. easy as. Just make sure the housing are the same size and everything will be easy as.
Cheers,
Shane
And get the backlash correct when redoing up the nut.