Page 1 of 1
1999 Petrol Gu front tail shaft
Posted: Thu Nov 11, 2010 2:36 pm
by shauni18
hey guys. i have just got a 5 inch lift fitted to my 1999 Gu st 4500 patrol and noticed there is minimal clearance in between my front tail shaft and the crossmember on the chassis. what can i do to get more clearence. cheers
Re: 1999 Petrol Gu front tail shaft
Posted: Thu Nov 11, 2010 5:16 pm
by lozz_ti
i fitted 15mm spacers between the chassis and the crossmember and had to put longer bolts in aswell on my gq to get more clearance but it still rubbed when flexing or going around right turns. i ended up knotching out the cross member and welding a plate in there.
regards lozz
Re: 1999 Petrol Gu front tail shaft
Posted: Thu Nov 11, 2010 8:13 pm
by ludacris
You have to cut out that piece of the cross member that the front tail shaft rubs on.
Cris
Re: 1999 Petrol Gu front tail shaft
Posted: Thu Nov 11, 2010 10:59 pm
by shauni18
cheers guys.. will get onto that asap.