Page 1 of 1
Series 6 Pto Warn Winch.
Posted: Tue Nov 16, 2010 2:41 pm
by Buckshot
I just got one of these from work. Seems in good nick. Are these winches any good? Can they go on a GU Patrol?
Cheers.
Re: Series 6 Pto Warn Winch.
Posted: Tue Nov 16, 2010 4:21 pm
by uninformed
post up some pics. Are they pto or hyd? they carnt be to bad being made by warn
Serg
Re: Series 6 Pto Warn Winch.
Posted: Wed Nov 17, 2010 5:45 am
by Buckshot
It might actually be hydraulic. I will get some photos up this arvo.
Re: Series 6 Pto Warn Winch.
Posted: Thu Nov 18, 2010 2:20 pm
by smithie
It sounds like a Warn Series 6 Hydraulic Winch with a capacity of 6000lbs (2720kg).
I would suggest it is too small for a GU Patrol.
If you were to use it, it could be run off your powersteering pump (aka milemarker -although due to the gearing it would be 4.3x slower than even a milemarker - which is already slow), custom engine driven clutched hyd pump or if your GU has a PTO output, from your gearbox.
To run dedicated hydraulic would also req a custom reservoir, spool/counterbalance valves etc, piping etc.
Check:
http://www.warn.com/industrial/winches/ ... ulic.shtml
Regards,
Dan