Hi all, a mate of mine is wondering if he can do a gearbox conversion from his 4 spd box to a 60 series 2F 5spd box?
If yes, what's involved and does it need to be engineered approved?
Let me know your thought or been done.
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
BJ40 gearbox conversion
Moderators: toaddog, Elmo, DUDELUX
BJ40 gearbox conversion
"My anti-drug is 4wd"
Re: BJ40 gearbox conversion
Not possible.
Re: BJ40 gearbox conversion
Amoung things to be changed is the gearbox input shaft. Needs to shorten/extend the driveshafts, crossmember work, probably something in the tunnel. Maybe even a change in handbrake setup too.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Re: BJ40 gearbox conversion
depends on year of BJ40
if you have 100mm between rear transfer flange and crossmember it can be done
if you have the late model bj with split case hand brake is not an issue
tunnel is no biggy its just a trim of the holes
the only problem is the input shaft is diffrent from petrol to desial
no engineer if you dont move crossmembers ( late model )
if you have 100mm between rear transfer flange and crossmember it can be done
if you have the late model bj with split case hand brake is not an issue
tunnel is no biggy its just a trim of the holes
the only problem is the input shaft is diffrent from petrol to desial
no engineer if you dont move crossmembers ( late model )
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Re: BJ40 gearbox conversion
Do elaborate please.......vk7ybi wrote:Not possible.
Show me the money..SHOW ME THE MONEY
Who is online
Users browsing this forum: No registered users and 3 guests