Outer Limits 4x4 Board

Does anyone have one i can borrow for 4 holes only? (will be using it in a mill so im not bodgee)

The reamer is custom made specially for the 4 bolt hub toyota steering arm taper washers.

(like the M23 Taps for FJ80 joints)

One site that makes them http://www.xkut-reamers.com/servlet/StoreFront" onclick="window.open(this.href);return false;
They are very easy to deal with, but just working out if its cost effective for a 1(4hole) use only..

Please help!

http://www.yellowpages.com.au/nsw/arnde ... sting.html" onclick="window.open(this.href);return false;

These people have one!

Are you sure on the 37.4 deg.. the site you mention seems to show 34.7.....

oops. 34.7

if you have a rotary table you could set the arms up on that and tilt the head 17.35 deg to mill it with an emdmill. otherwise i think i still have one i made years ago for my hi steer arms. i'll have a look. pm me if i forget.

Dont worry about it dude.

Dont have a rotary table at work. If all goes to shit and i cant put the cones on the bottom, i will go to that diff place. Shouldnt be much $ to do.

Thanks guys.