Outer Limits 4x4 Board

hey all, i have a 105 1hz turbo and it suffers from bad rear axle tramp on hill starts, ive checked all the rear bushes and they are ok, and the transfer pinion angle-tailshaft-rear pinion are pretty much in a straight line. it did it in standard form and is slightly worse with 2in lift and a bit more weight.

one or more of your upper/lower trailing arm bushes are worn out. They may look ok when viewed statically but if there is 'tramp' thats really the only place it can be.

thanks zoltan, ive got a spare set of arms in the shed, may be worth swapping them over and see if there is a difference, its a quick test to do.

Check all your bushes and shock absorbers.

check out your top quality toyota clutch. quite common shudder problem under load for utes, might be the same for wagons?