1HDFTE 5sp Auto - not shifting into 5th or lockup in 4th
Posted: Tue Dec 07, 2010 2:28 pm
Hi, the FTE conversion has been completed and I have been driving it around for a while. I am very impressed by the refinement and the performance. It really doesnt feel like it has lost anything to the V8 and teh auto shifts superbly. Engine oil stays clean too and exhaust doesnt smell like an older style but good condition diesel either.....
But, doesnt do 5th or lockup.
Does anyone know about ecu inputs that might cause this to happen (like limp mode?). I am taking a stab at it.
Tonight/tomorrow night I will put a meter on the wires that fire the 5th gear solenoids to see what is heppening.
Now, the main solenoid plug was not pulled down properly before (would only shift manually at that stage) and after pulling it down it shifts fine (with problems mentioned).
IF the plug isnt pulled down when you connect the battery, is there a check function in the ecu that causes it to think "no 5th or lockup available" "dont run lockup or 5th"??
Initially the box oil level was low. 2 litres of oil fixed that but I hope no damage to the box.....
Cheers, Graeme
But, doesnt do 5th or lockup.
Does anyone know about ecu inputs that might cause this to happen (like limp mode?). I am taking a stab at it.
Tonight/tomorrow night I will put a meter on the wires that fire the 5th gear solenoids to see what is heppening.
Now, the main solenoid plug was not pulled down properly before (would only shift manually at that stage) and after pulling it down it shifts fine (with problems mentioned).
IF the plug isnt pulled down when you connect the battery, is there a check function in the ecu that causes it to think "no 5th or lockup available" "dont run lockup or 5th"??
Initially the box oil level was low. 2 litres of oil fixed that but I hope no damage to the box.....
Cheers, Graeme