Warn Hi Mount Q
Posted: Wed Dec 08, 2010 6:33 pm
I've had Warn Hi Mount 8274 kicking round the garage for a couple of years that I scored of a mate. It is without a motor or solenoid pack but my plan was to install a 6hp motor I have and he had 2 cross braces welded on the rear to prevent any distortion. Not long after I got it, I stripped it down and cleaned all the parts but ended up shelving the project for more pressing issues at the time.
Now I've revived the project and I want to get it working again. But the issue seems to be that when searching for parts, I can't find anything that even comes close to matching the serial number stamped on the housing. The sticker has all but wasted away and the only numbers I can see are stamped in and are: 283610 and EE6. I would like to get a top and bottom rebuild kit but with the numbers I have, I don't know what kit or part numbers I need. Also, can someone confirm if the upper rebuild kit includes the 2 clutch bands???
The winch body has the splined gear to take the 6hp motor, so I assume it isn't too old. Any help is much appreciated.
Now I've revived the project and I want to get it working again. But the issue seems to be that when searching for parts, I can't find anything that even comes close to matching the serial number stamped on the housing. The sticker has all but wasted away and the only numbers I can see are stamped in and are: 283610 and EE6. I would like to get a top and bottom rebuild kit but with the numbers I have, I don't know what kit or part numbers I need. Also, can someone confirm if the upper rebuild kit includes the 2 clutch bands???
The winch body has the splined gear to take the 6hp motor, so I assume it isn't too old. Any help is much appreciated.