Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
vacuum line to clutch
Moderators: toaddog, TWISTY, V8Patrol, Moderators
vacuum line to clutch
On a 1995 Nissan 2.8 turbo diesel the clutch has a vacuum boost unit that sits between the peddle and the master cylinder in the fire wall. Does anyone know where the vacuum line attaches to the unit or where it attaches to the vacuum unit on the side of the engine bay?
Re: vacuum line to clutch
the 1995 2.8 doesnt have a vac boosted clutch that I know of.
got any pics?
got any pics?
Re: vacuum line to clutch
Thanks Clanky you have confirmed my thoughts it would have to have the smallest vacuum tank around, the manual does have a pic of one must have come out on the 96/97 model.
Re: vacuum line to clutch
vac boosters were only on the 4.2 engines as far as I know.
The black mounting plate on the 2.8 you might be thinking of is only a spacer between the master cyl and the pedal. Its only about ~40mm in dia in the centre
The 4.2 booster is 5 inches dia and about 3 inches deep at a guess
The black mounting plate on the 2.8 you might be thinking of is only a spacer between the master cyl and the pedal. Its only about ~40mm in dia in the centre
The 4.2 booster is 5 inches dia and about 3 inches deep at a guess
Who is online
Users browsing this forum: No registered users and 0 guests