Outer Limits 4x4 Board

I'm trying to put my ifs rears in but I can't get pin out of the front
of the Sping I've tried to fill it with wd40 but I'm a bit stuck 4 ideas
iv heard of ppl using fire to burn the bush out but im not a big fan
of my Truck on fire even if it is "controled" so any ideas would b great


James

Are you trying to get the pin out to get the old springs out of the car, or get the bush out of the ifs spring?

The bushes are pressed into the spring(hanger end), take the springs down to the local mechanics(make sure they have a hydraulic press) and get them out in about 30seconds.

he said he cant get the pin out.
have you tried taking weight off the car.
Jack it up slowly while getting someone to tap it with a hammer until its sort of loose.
Are you the james that works at all 4x4?

Sorry mate, I misread it.
But try what Georgey said.

Yer I've got all the weight off them every other bolt is out just these
two left iv belted the left hand one with a hammer and it wont come out
but the fuel tank is in the way of the right hand side one normally I use
the oxy at work but car is at home and I don't really want use the oxy
on my car

Yer trying to get the pin out to get the spring out

Try using a claw hammer or hit a big srew driver into the other side of the pin. Where it has the flat plate on it and it will leaver out .

I ended up using the angle grinder on mine and cutting the pin between the hanger & spring, then replaced the pin.

I ended up Putin some heat in to it and twisting it and it came out
thank god