Outer Limits 4x4 Board

i have a 1990 3fe 80 series, and i have come across a 1hz pretty cheap(rusted out complete 1994 80 series)
will the 1hz bolt up to the a440 auto? i realize ill have to swap wiring etc
just want to know if its a straight swap

cheers steve

I looked at doing this 2 years ago. You will need a 1hdt auto bellhousing (the hardest thing to acquire), A diesel torque converter (the petrol is different internally), and a 1hdt auto flex plate. The shift points are different too, I think they were higher in the rev range being a petrol gearbox.

In the end I didn't do it as no one wanted to sell me a bellhousing unless it was attached to a transmission.

http://www.outerlimits4x4.com/viewtopic ... 8&t=189386" onclick="window.open(this.href);return false;

thanks simkell, didn't think it would be easy lol
so next question is, how hard is it to swap the 1hz +5 speed into my petrol auto? i can do the grunt work/have the facilities to do it . what are the hidden bits, do i need new engine mounts? do i need to move the gearbox cross member? is it hard to swap the wiring loom? anything else i need to know?
sorry about all the questions

cheers steve

engine mounts are different, they will need to be removed from the old vehicle. the clutch pedal box is a straight swap. As for the wiring i'm not sure, but it doesn't take much to get a 1HZ running.

thanks again simkell, ill have to go count my Penny's now lol