Air con belt
Posted: Tue Jan 11, 2011 7:28 pm
My 4500 80 series keeps stretching air con belt, and they keep screeming, if i tighten them up they just stretch again.
please help.
please help.
Page 1 of 1
Re: Air con belt
Posted: Tue Jan 11, 2011 8:19 pm
bearings in the AC pump may be near stuffed putting more strain on it?
Re: Air con belt
Posted: Wed Jan 12, 2011 11:15 am
Are you tightening the locknut on the front of the idler pulley after you adjust it up?
Re: Air con belt
Posted: Wed Jan 12, 2011 7:05 pm
their is no lock nut, but i mite make a mesurement and see if it moves, or can i some how tell if bearings are worn out,drr wrote:Are you tightening the locknut on the front of the idler pulley after you adjust it up?
i spun it when engine is of, but felt ok.
Re: Air con belt
Posted: Thu Jan 13, 2011 10:17 am
The locknut is the nut on the front of the idler pulley. I'm sure they're the same as my 100 series.
Re: Air con belt
Posted: Sat Jan 15, 2011 12:28 pm
i havnt tuched the pully nut, just the ajuster bolt
Re: Air con belt
Posted: Sat Jan 15, 2011 1:39 pm
that will probably be your problem if i was u i would pull your belt off and give the adjuster idler and the a/c pully a spin to see if they make any noise if they do replace the bearingd 