Ive got a Tabor 9K winch that im rebuilding for a mate (at the same time that i rebuilt my XD9000 warn) and im trying to work out just how to set the brake up on it.
The warns got the standard 3 shoe cone brake, and found instructions for that, but the Tabor has a dual spring set up.
Not sure how the hell it goes back into the drum, i can get it in, but when i bolt the motor back on and power it up on the bench, with the gearbox engaged, it locks the brake on and stalls out the motor, with it disengated, it spins the drum at motor speed, indicating that the brakes jamming on.
Any advice on how to set this up before i have to resort to taking it to ARB to get it worked out?
Cheers!!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tabor 9K winch- Brake issues.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Tabor 9K winch- Brake issues.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Re: Tabor 9K winch- Brake issues.
Riiiigggghhht.... This gets better.
Got it aligned right (so it disengages under power) and it lasted about 4 revolutions before the springs shattered
Rang ARB, They recon they dont deal with them... Which is a load of crap really...
So. Next question. Does the 3 shoe brake system from a Warn fit in a Tabor? im not really keen to dismantle my own winch to find out, but will if i have too. From what i can see, the motors have the same splines and protrusion length, and all you need to swap is the hex shaft and brake assembly.
Anyone able to save me some work?
Got it aligned right (so it disengages under power) and it lasted about 4 revolutions before the springs shattered
Rang ARB, They recon they dont deal with them... Which is a load of crap really...
So. Next question. Does the 3 shoe brake system from a Warn fit in a Tabor? im not really keen to dismantle my own winch to find out, but will if i have too. From what i can see, the motors have the same splines and protrusion length, and all you need to swap is the hex shaft and brake assembly.
Anyone able to save me some work?
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Who is online
Users browsing this forum: No registered users and 25 guests