Page 1 of 1
Replacement winch part?
Posted: Thu Jan 13, 2011 4:23 pm
by samdumbert
Ive got a warn xd9000 and the end cap on the motor is badly cracked. I spoke to ARB and they will only sell me a complete motor.
Where can I get the end cap?
Re: Replacement winch part?
Posted: Fri Jan 14, 2011 4:36 pm
by patrol man
http://cgi.ebay.com.au/NEW-Winch-Motor- ... 3a567dedab" onclick="window.open(this.href);return false;
I dont know if this will fit up, but worth a look.
Re: Replacement winch part?
Posted: Fri Jan 14, 2011 5:10 pm
by samdumbert
That link isnt working, ill see if i can search for it on ebay.
Re: Replacement winch part?
Posted: Sat Jan 15, 2011 9:03 am
by crazie
Hi mate
I have a few end caps off my race truck motors as I have got the flaming fab adaptor. They are off the 6hp Motors, not sure if the will fit, but you can have one.
Crazie
Re: Replacement winch part?
Posted: Sat Jan 15, 2011 1:39 pm
by MICK77
Don't go through ARB. They are a rip off.
I cracked a motor mount on my XD9000 and they wanted over $180 for it.
Contact Ateco. They are the importer / distributor for Warn in Australia.
I paid $100 for the mount all up posted to my door.
http://www.atecoequipment.com.au/defaul ... icle&ID=15" onclick="window.open(this.href);return false;
Cheers,
Micko
Re: Replacement winch part?
Posted: Sat Jan 15, 2011 5:16 pm
by samdumbert
crazie wrote:Hi mate
I have a few end caps off my race truck motors as I have got the flaming fab adaptor. They are off the 6hp Motors, not sure if the will fit, but you can have one.
Crazie
That would be sweet my end cap is 115mm in diameter and 45mm in height, does that sound about right?
How much do you want for it? my post code is 2768
Re: Replacement winch part?
Posted: Sat Jan 15, 2011 5:19 pm
by samdumbert
MICK77 wrote:Don't go through ARB. They are a rip off.
I cracked a motor mount on my XD9000 and they wanted over $180 for it.
Contact Ateco. They are the importer / distributor for Warn in Australia.
I paid $100 for the mount all up posted to my door.
http://www.atecoequipment.com.au/defaul ... icle&ID=15" onclick="window.open(this.href);return false;
Cheers,
Micko
Thanks for the link, good to know im not stuck dealing with ARB.
Re: Replacement winch part?
Posted: Sun Jan 16, 2011 10:20 am
by crazie
samdumbert wrote:crazie wrote:Hi mate
I have a few end caps off my race truck motors as I have got the flaming fab adaptor. They are off the 6hp Motors, not sure if the will fit, but you can have one.
Crazie
That would be sweet my end cap is 115mm in diameter and 45mm in height, does that sound about right?
How much do you want for it? my post code is 2768
Hi mate, you can have it, not worth anything to me. Size looks to be the same, about 115id and 45mm deep. Pm me your address
Ads