Outer Limits 4x4 Board

hey just wondering if anyone can help ? ive cut and shut the rear half of a 92 surf chassis onto a 82 hilux i put 2 inch lifted coils into the rear to try and match the hieght of the front but its still about 2 inch's to low and they dont have springs on the shelf any higher . is there a spring out of another 4b that will do the job?

standard 80 series rear coils will lift a normal runner around 3-4 ". that may help u

Custom king springs..

I have 4" springs in mine but really need 5" coils.

Luke from lukeys4x4 ordered them for me last time, not sure if he can help.. Was a while ago

Brad

crankycruiser wrote:standard 80 series rear coils will lift a normal runner around 3-4 ". that may help u

I thought stock height 80 springs lift a 4 runner about 2 inches. So 2 inch raised 80 springs should go about 4 inches in a 4 runner. 20mm spacers will net you almost an inch more on top if needed.

Pretty sure factory 80 series rear coils give 3-4" lift and aftermarket std height 80 series coils bout 5".

IMO anything over 4" lift wants some extra width to reduce the flopp'in chances when check'in out the mall scene.

RAY185 wrote:

crankycruiser wrote:standard 80 series rear coils will lift a normal runner around 3-4 ". that may help u

I thought stock height 80 springs lift a 4 runner about 2 inches. So 2 inch raised 80 springs should go about 4 inches in a 4 runner. 20mm spacers will net you almost an inch more on top if needed.

I put my standard well used springs in a mates runner and it lifted it a good 4"

Aha! So I had it a little ass backwards. I threw out quite a few stock 80 springs last year.

Hey guys, In my lux i have a nissan gq rear diff with factory gu coils and its up about 3",im pritty sure factory 80 is about the same.