Outer Limits 4x4 Board

hey guys sorry to be a pain, can some1 please tell me the steps in installing a oil pressure gauge, i have a 1992 hilux rn105. just wondering where the oil pressure switch would go etc.

even a link to a helpful site would b muchly appriecated.

thanks guys.

You need to locate your factory oil pressure sensor, and then either get rid of the factory sender, and install your aftermarket sender in its place, or the better option is to get a T Piece so you can have both guages running.

If its a mechanical guage, you will just have a capiliary tube rinn ing into the back of the guage, same deal, need to locate factory sender, T piece, done.