Page 1 of 1
4.88 ring and pinion
Posted: Sun Jan 16, 2011 5:46 pm
by Madaz
Hi there,
I want to run some 4.88 gears in my nissan gq diff, what are the good aftermarket brands to buy? or should i say which brands to avoid?
Cheers
Re: 4.88 ring and pinion
Posted: Sun Jan 16, 2011 5:52 pm
by flexytj
track down dan from kpd industries he sells them
http://www.kpdindustries.com.au/
Re: 4.88 ring and pinion
Posted: Sun Jan 16, 2011 9:39 pm
by pigletracing
I ran Hobbsies from H4 in my comp rig.. I put them threw hell.. I mean I really punished them & they were fine with not even a sighn of a issue for years & years they were around $5 to $6 hundred ish a set ( they were the ones out of Italy.
I think you can get intouch with hobbsie via NAV RUN or CLIFFHANGER.
cheers piggy
Re: 4.88 ring and pinion
Posted: Mon Jan 17, 2011 10:13 pm
by Craker-s
the one's from marks are very good to i have had a set in for 2 years now and put my GQ through hell broke 3 arb lockers not a diff yet
Re: 4.88 ring and pinion
Posted: Fri Jan 21, 2011 1:08 pm
by Madaz
Ive read on the net about Nismo 4.8 gears, Has anyone seen or run a set of these?
Cheers
Re: 4.88 ring and pinion
Posted: Tue Feb 08, 2011 8:30 pm
by dank
Hey Madaz,
There is only one brand of 4.88 gears available in Aus at the moment and they are made in italy. My supplier currently has stock and I can get these to you for a reasonable price. If you are interested, pm me with your location so I can work out the shipping and I will get back to you.
As Piglet said, these are the same ones he was running and we generally have a good run with them IF they are setup properly by a competent person and run in correctly.