Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ln106 VP V6 to ECO V6 wiring?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 94
Joined: Mon May 07, 2007 5:29 pm
Location: A.C.T

Ln106 VP V6 to ECO V6 wiring?

Post by luxembuger »

G'day, I've got an Ln106 running a series 2 3.8 V6 and wouldn't mind updating to a later model V6, Ecotech for example. Just wondering what the difference in wiring is between the two different donks? Also I'm running a manual 5 speed which I wish to retain...

All helpful hints are appreciated!

Cheers, Chris.
97 DC lux
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Re: Ln106 VP V6 to ECO V6 wiring?

Post by Frankenyota »

How did you go with this?
I was told you can use an ecotech motor with the computer and wiring loom from a VN, VP commodore with some small mods. eg hooking up the map sensor as ecotech runs an AFM.
Did the ecotech have a alloy sump?
I was going to look further into this swap when my motor dies, and i'm hoping the sumps swap over.

Cheers
Matt
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Top
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

Re: Ln106 VP V6 to ECO V6 wiring?

Post by stock 4runner »

I know if you had a vr motor and loom you can put a vs ecotec in using all standard wireing.
Rims flipped from $50
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 5 guests