Page 1 of 1
MQ rear locker(31spl) into GQ HiPinion(31spl)??
Posted: Tue Jan 18, 2011 10:11 am
by WICKED
Will a MQ rear air locker (H233 31 spline) bolt onto a GQ HiPinion Crown Wheel and pinion??
I have an MQ rear locker in a GQ front Leaf housing that I want too now run a GQ HiPinion centre in and want to know if my locker will fit.
Are GQ low pinion front and GQ hipinion front they same bolt pattern on the Housing?
Re: MQ rear locker(31spl) into GQ HiPinion(31spl)??
Posted: Tue Jan 18, 2011 10:47 am
by WICKED
AFAIK
RD136 - GQ Hi-Pinion Front
RD04 - MQ Rear
RD135 - GQ Low Pinion rear
RD134 - H260
RD144 - H260 34spline
RD70 - 3litre GQ/GU
Re: MQ rear locker(31spl) into GQ HiPinion(31spl)??
Posted: Tue Jan 18, 2011 10:59 am
by zookimal
WICKED wrote:AFAIK
RD136 - GQ Hi-Pinion Front
RD04 - MQ Rear
RD135 - GQ Low Pinion rear
RD134 - H260
RD144 - H260 34spline
RD70 - 3litre GQ/GU
3L RB30 GQ's all have HB233 (RD135) rears.
Is the centre fitted to leaf front GQs just a GQ rear HB233 centre? A GQ high pinion front third will physically bolt straight into a rear housing that a low pinion came out of. *edit* obviously with the correct rotation gears and spline count for the application.
Re: MQ rear locker(31spl) into GQ HiPinion(31spl)??
Posted: Tue Jan 18, 2011 11:16 am
by WICKED
zookimal wrote:WICKED wrote:AFAIK
RD136 - GQ Hi-Pinion Front
RD04 - MQ Rear
RD135 - GQ Low Pinion rear
RD134 - H260
RD144 - H260 34spline
RD70 - 3litre GQ/GU
3L RB30 GQ's all have HB233 (RD135) rears.
Is the centre fitted to leaf front GQs just a GQ rear HB233 centre? A GQ high pinion front third will physically bolt straight into a rear housing that a low pinion came out of. *edit* obviously with the correct rotation gears and spline count for the application.
I'm not sure. The 3rd member looks a little different but and heard of MQ rear's going into a GQ Rear, Bolt in (centre and locker)
Re: MQ rear locker(31spl) into GQ HiPinion(31spl)??
Posted: Tue Jan 18, 2011 1:01 pm
by WICKED
Am told the MQ Rear with bolt into the GQ HP
Re: MQ rear locker(31spl) into GQ HiPinion(31spl)??
Posted: Mon Jan 24, 2011 8:55 am
by WICKED
WICKED wrote:Am told the MQ Rear with bolt into the GQ HP
Have both diffs out and they are being changed over this week some time..