Outer Limits 4x4 Board

Hi guys trying to wire up a electronic distributor of a Tb42e onto my Tb42 but don't have the original plug, so not sure on how to wire up, any help will be appreciated.

Cheers chris

So do i take as no reply that no-one has done this....

Cheers Chris

if electronic dizzy has 2 wires they go to coil, pos and neg, will need to change coil to electronic one and remove resistor

Tb42e dissy is a crank angle sensor so it needs an ECU to fire the coil.

the carbi Dizzy has a Mechanical and Vaccum advance system. the EFI version has no Mechanical or Vaccum advance as this is all handled by the ECU, so you can put it in and wire it up bit the car will run like a bustest dog.

Thanks for the reply's guys....