Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what width wheels for bead locks
Moderators: toaddog, TWISTY, V8Patrol, Moderators
what width wheels for bead locks
Ok ive brought a set of weld on external bead locks. i have 2 sets of rims one set 10 inch wide and one set 8inch i never plan on running anything under 13" wide rubber witch rims should i fit locks to? im gessing ill end up with either 9 inch or 11 inch wide rims.
Blown ls1 GQ winch truck. and GU tow car / daily
Re: what width wheels for bead locks
I run a set of 37"x13" on 8 inch rims that have no beadlocks.
Are you planning on bead locking both sides of the rim ? It can make a big difference.
What do you use the tyres/rims for ?
These and no doubt more things need to be taken into account before you make a decision.
Not much help I know but it might give you something to think about.
Are you planning on bead locking both sides of the rim ? It can make a big difference.
What do you use the tyres/rims for ?
These and no doubt more things need to be taken into account before you make a decision.
Not much help I know but it might give you something to think about.
Re: what width wheels for bead locks
The 8s will give you better bead retention on the inside bead.
Nitto Mud Grapplers, Lockrite, 4.3s, Trail Ready BL, PTO, High pinion rear,Gu diff with Buds Customs armour and heaps of Superior gear, 24% Reduction .
Re: what width wheels for bead locks
only bead locking the outer. use the car for winch comps, ls1 powerd gq ute.
Blown ls1 GQ winch truck. and GU tow car / daily
Re: what width wheels for bead locks
X2SIM79 wrote:The 8s will give you better bead retention on the inside bead.
Who is online
Users browsing this forum: No registered users and 0 guests