is there a need for me to get an engineers cert for a jimny with 235/75/15 tyres on it (29") and a 3" suspension lift. Im in Victoria.
if so does any one know of a good engineer i could work with in victoria?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engineers cert for jimny
Re: engineers cert for jimny
Jump on over to the Victorian Suzuki 4WD Club... they will know.
I have mine eng' certed on 235's with a 50 + 50 lift in NSW. Do make sure you get a steering dampner fitted, they tend to wander badly once you lift them - bump steer is a big issue
I have mine eng' certed on 235's with a 50 + 50 lift in NSW. Do make sure you get a steering dampner fitted, they tend to wander badly once you lift them - bump steer is a big issue
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Re: engineers cert for jimny
Technically yes, but you won't get those tyres certed on a jimny I'm afraid in Vic* - they are more than 50mm bigger than the largest tyre available for the car.
*It might be possible, but the amount of work you'd have to do isn't worth it. You would need to prove that every engineering parameter on the axles and brakes matches a vehicle with 27" or larger tyres - like the new GV.
...But as you are only need to swap a set of stock springs and tyres back on - a couple of hours work, tops - to pass a RWC, I don't think I'd bother.
Steve.
*It might be possible, but the amount of work you'd have to do isn't worth it. You would need to prove that every engineering parameter on the axles and brakes matches a vehicle with 27" or larger tyres - like the new GV.
...But as you are only need to swap a set of stock springs and tyres back on - a couple of hours work, tops - to pass a RWC, I don't think I'd bother.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests