Page 1 of 1
IGNITION
Posted: Fri Mar 04, 2011 10:45 am
by Pajeropaul
was wondering if any has any idea on how to replace the ignition switch in a nf 89 3.0 lt pajero or has a diagrame as i have checked they have 2 bolts but one end is a nut inside the switch unit and the other looks like the have snapped off the head so you can not just undo it and i need to relace the unit any ideas thanks
Re: IGNITION
Posted: Mon Mar 07, 2011 5:59 pm
by alexiboris
The tops of the bolts are designed to break off when tightened. It is a theft deterrent. To remove them, use a centre punch and small hammer and tap them around, they should undo easily. You can buy new ones from Mitsubishi, or just use regular bolts.
Re: IGNITION
Posted: Mon Mar 07, 2011 6:33 pm
by brissle
If ya can get a drill in there, drill the top off the bolts, done this a few times before.