Outer Limits 4x4 Board

I had a customer/friend put my work van together internally which included doing the electrics (he's not an electrician but assured me he could do it easily) I have a 240v setup to run my hyrdrobath, clippers and other stuff via an extension lead to the clients powerpoint.

I've been told by another customer who's a licenced elecrician that the job he did is very unsafe. I'm working with water and electricity all day long so it's a worry.

Is there anyone on here (licenced) who could have a look at it for me, and possibly do some rewiring shortly after? Actually I would say it would definately need to be redone, it's a mess. I'm in Albion Park. Will come to you.

I've learnt my lesson twice now, never again.

I'm near Penrith if you cannot find someone closer Em.

lump_a_charcoal wrote:I'm near Penrith if you cannot find someone closer Em.

Thanks Linc!

I'd rather give my money to a fellow OL member if I can.

If it is suspect, get it fixed straight away. You dont get many second chances with electricity.

Can you go for low voltage equipment?

Come on guys there has to be someone on the south coast that can help Emma out. From what she has told me its a fatality waiting to happen.

Can't help from here, but for your safety in the meantime, it would be prudent to make sure that you supply the van from an RCD protected circuit (i.e. it has a "safety switch").
Probably the best way to ensure this is to buy an extension lead with an inline RCD and use that to supply the van.

Do you still need help with this?

More than happy to help out..... little prob is that i live on the Central coast. Call me if you have any questions - 0404 855 060