Outer Limits 4x4 Board

Posted: **Mon Mar 21, 2011 4:51 pm**

hey guys getting a air tank in the back of my ute tank is made but was wandering where the pressure switch goes does it matter at all or the check valve ? found this pressure switch on ebay would it be any good ?
http://cgi.ebay.com.au/VIAIR-90-120psi- ... 4aa9129884" onclick="window.open(this.href);return false;

Posted: **Mon Mar 21, 2011 5:22 pm**

If you are running an air tank then it is best that the check valve is on the air tank.

The pressure switch can go almost anywhere - however if you place it close to the compressor and use small lines between there and the compressor it might cut out too early.

Posted: **Mon Mar 21, 2011 5:34 pm**

cool the check valve can that go anywhere as well ? and the pressure switch will be on the tank on the other side of the tray ?

Outer Limits 4x4 Board

air tank set up

air tank set up

Re: air tank set up

Re: air tank set up