78/79 Series Flexy Coils require Guinea Pig
Posted: Mon Apr 04, 2011 1:23 pm
I have some Ultra flexy coils ready for testing. They will suit a 3" lift if you have a steel bar and winch or a 4" lift with no winch. I don't need you to test the flex, only the ride quality.
They come with a full warranty and if they don't sit at the correct height I will replace them. They can give about an extra 4 inches of flex over a regular coil.
Spring rate is about 240lbs at ride height if you don't have a winch. They have a variable spring rate meaning they will increase to 310lbs at ride height if you were to put a heavy bar and winch on the vehicle.
They are manufactuered out of 20% higher tensile wire and are black.
Once testing is complete other heights will be available.
$300 for the pair including freight.
We get the wire tapered at the top of the coil which is why they are more expensive and why they achieve the extra flex.
You should notice better ride quality and less body roll then a regular coil.
Shane.
They come with a full warranty and if they don't sit at the correct height I will replace them. They can give about an extra 4 inches of flex over a regular coil.
Spring rate is about 240lbs at ride height if you don't have a winch. They have a variable spring rate meaning they will increase to 310lbs at ride height if you were to put a heavy bar and winch on the vehicle.
They are manufactuered out of 20% higher tensile wire and are black.
Once testing is complete other heights will be available.
$300 for the pair including freight.
We get the wire tapered at the top of the coil which is why they are more expensive and why they achieve the extra flex.
You should notice better ride quality and less body roll then a regular coil.
Shane.