Page 1 of 1

1hdt fuel pump

Posted: Sat Apr 09, 2011 12:04 pm
by ledgend80
what is the sort of power can you get out of a standard 1hdt fuel pump with ball bearing turbo and intercooler. basically is getting the standard fuel rebuilt to factory specs then tuning it good enough or am i better off getting some internal mods done. i know this is a rather open ended questions but what have others experienced.

any info would be good

Re: 1hdt fuel pump

Posted: Sat Apr 09, 2011 4:50 pm
by Northside 4x4
The standard pumps can supply all the fuel you will need for those mods, Unless your running crazy high boost.
To keep the whole lot reliable, I would say somewhere around the 15-17Psi mark (depnding on the turbo) would get you a comfortable 110+kw atw with nice lean AFR's and low EGT's.

It all depends on the application. Are you after every possible kw? Or is longevity important to you? (Ie, plan on keeping the car for the next 10 years or what ever).
Are you going to be towing with it? etc...
Just list those things up and we can recommend which setup and how much power it is possible to make.
Cheers
Lindsay

Re: 1hdt fuel pump

Posted: Sat Apr 09, 2011 5:10 pm
by ledgend80
ok thanks for that thats all i really wanted to know if it would deliver enough fuel. as it is a daily driver relability and longevity are important but also is a few more ponies to get the beast going.

do you have any dyno graphs for any 80 series that you have done

Re: 1hdt fuel pump

Posted: Sat Apr 09, 2011 5:12 pm
by ledgend80
also i picked up another 1hdt fuel pump and was wondering if this is a genuine 1hdt fuel pump or a 1hz fuel pump

these are all the numbers i got of the id plate

22100-17301
VE6/12F1800RND782
096000-7820
04M0261
7301

Re: 1hdt fuel pump

Posted: Tue Apr 19, 2011 8:10 pm
by ledgend80
any ideas

Re: 1hdt fuel pump

Posted: Wed Apr 20, 2011 10:12 am
by Dzltec
Yes that is a 1hdt pump number, for a manual 80 series.


Andy