Outer Limits 4x4 Board

Hi i am ordering some rims from america and they say the can make to suit any stud pattern and off set so can someone tell me the standard measurement for a GQ please.

starky wrote:Hi i am ordering some rims from america and they say the can make to suit any stud pattern and off set so can someone tell me the standard measurement for a GQ please.

Careful of some of the centre bore of those american rims. I purchased a pair of steel rims from Summit a couple years ago and had to bore out the middle to 112 mm as it came with 108. I saw a set of alloy though a month ago on that website and the bore was ok (110). Here are the offset specs

WHEEL 'RUNOUT (Radial and lateral)
Turning angle dsgm
Full turn
Insideloutside 30'-32"JZT -299 280 - 30°/280 - 30"
MdtOP I station Wloon I Pickup
0" - 1"
2"ZW - 392W
Wheel runout mm (in)
Road wheel
Size
Offset mm (in)
Tire size
Z%X'-f06' I 2050' - 3050'
70 -80
2.0 (0.079)
-2 to 0 (-0.- to 0) 1-9' to 0'
5.50F-16SDC
30 (1.18)
6.5S16-6PRLT
7.00-16-6PRLT (Front)
7.00-16-10PRLT (Rear)
7.W16-6PRLT
7.W16-8PRLT
7BOR16-6PRLT
7.50R16-8PRLT
1.5 (0.059)
-
5.50F-15SDC
-5 (4.20) -
9.00-156PR
WJ-16
30 (1.18)
215180R16 1070
0-2(0-0.08)IO'-9'
1 -3 (0.04-0.12)19'- 18'
7JJ-15
5 (0.20)
1 OR 1 5-6PR LT

As you can see for the most part they have a positive offset, with the wide (31.10) having 5 mm.

My purchase as the only other steel rim with thei 110 mm was a positive offset
http://www.summitracing.com/parts/USW-84-7860L/" onclick="window.open(this.href);return false;

The one i found lately
http://www.summitracing.com/parts/MTT-1168412/" onclick="window.open(this.href);return false;

Lawrence wrote:

starky wrote:Hi i am ordering some rims from america and they say the can make to suit any stud pattern and off set so can someone tell me the standard measurement for a GQ please.

Careful of some of the centre bore of those american rims. I purchased a pair of steel rims from Summit a couple years ago and had to bore out the middle to 112 mm as it came with 108. I saw a set of alloy though a month ago on that website and the bore was ok (110). Here are the offset specs

WHEEL 'RUNOUT (Radial and lateral)
Turning angle dsgm
Full turn
Insideloutside 30'-32"JZT -299 280 - 30°/280 - 30"
MdtOP I station Wloon I Pickup
0" - 1"
2"ZW - 392W
Wheel runout mm (in)
Road wheel
Size
Offset mm (in)
Tire size
Z%X'-f06' I 2050' - 3050'
70 -80
2.0 (0.079)
-2 to 0 (-0.- to 0) 1-9' to 0'
5.50F-16SDC
30 (1.18)
6.5S16-6PRLT
7.00-16-6PRLT (Front)
7.00-16-10PRLT (Rear)
7.W16-6PRLT
7.W16-8PRLT
7BOR16-6PRLT
7.50R16-8PRLT
1.5 (0.059)
-
5.50F-15SDC
-5 (4.20) -
9.00-156PR
WJ-16
30 (1.18)
215180R16 1070
0-2(0-0.08)IO'-9'
1 -3 (0.04-0.12)19'- 18'
7JJ-15
5 (0.20)
1 OR 1 5-6PR LT

As you can see for the most part they have a positive offset, with the wide (31.10) having 5 mm.

holy shit dude huge info there it basicly goes over my head, but be safe to say make sure it has a 102mm bore.

they are offering a -12 should this do the trick also do you know the bolt pattern spec

Yes it should do as a lot of people on this and other forums run a -25 from what i have read. i run a -6. The bolt patten is 6 X 5.5