Outer Limits 4x4 Board

hi i am looking to make or buy a new bullbar for my hj47 as i am sick of the current bar just plowing the mud and causing me to get stuck, can you please post pictures of what yours is and also can you fit a hj75 bullbar easily

thanks Shane Mulcahy

Started with a bent 75ser high mount bar cut the ends off made 2 new flat plate the width of the 45ser chassis welded it up and put the pipe on.

Thanks Skootin not a bad bar, and doesn't seem like anyone else has any haha please people so i can decide on one for mine that offers protection from kangaroos, emu's and the odd cow but still has a decent aproach angle

thanks Shane Mulcahy

Mulcahy wrote:Thanks Skootin not a bad bar, and doesn't seem like anyone else has any haha please people so i can decide on one for mine that offers protection from kangaroos, emu's and the odd cow but still has a decent aproach angle

thanks Shane Mulcahy

Mate, check Twistys fj40 build in the members section. He has had a couple through the years. Plus there are a few other 40 series builds throughout members section that have plenty of custom bars done. Ash

Plus there was a 6 or so page thread of pictures of 40s connected to all sorts of different bars just recently.

Use the search Luke!

[/img]

here you go - http://oz40.com/Pics/main.php?g2_itemId=27" onclick="window.open(this.href);return false;

and steelart above i think is seeling the sheet metal precut based on twistys design so pm him if you want one

heres myne it was about 150mm out further for a high mount but have since sold that so i brought it in


made it so spotlights a set back from front point of impact