Page 1 of 1
40 series door aliginment
Posted: Mon Apr 25, 2011 2:20 pm
by camo shorty
having trouble with getting the door seals mating to windscreen panel its close enough at the bottom but at the top its to far away. any tips would be appreciated thanks
Re: 40 series door aliginment
Posted: Mon Apr 25, 2011 4:43 pm
by MADSHORT
wind window down put knee against door and pull on top of window frame
cheers
Gordon
Re: 40 series door aliginment
Posted: Tue Apr 26, 2011 2:34 pm
by camo shorty
its not the door thats the problem..... its like the roof is to far forward and is holding the windscreen panel to far forward but i cant move it back with bolt adjusments was thinken of trying to bend/pull the hole roof back 1/2 an inch or so?
Re: 40 series door aliginment
Posted: Tue Apr 26, 2011 4:58 pm
by 80'sman
If it's an after market roof whoever fit it might have drilled the holes to far toward the front of the roof. I have fit a fibreglass roof before that had no pre drilled holes.