Page 1 of 1
C4 vs T700r4 length
Posted: Tue May 17, 2011 1:55 pm
by micka1
Just doing some research for the new project, and am after some lengths on the c4 auto versus the t700r4 auto whch will be mated to an atlas transfer so am also chasing the adaptor sizes to the atlas for each if anyone knows it would be great
thanks in advance
Re: C4 vs T700 length
Posted: Tue May 17, 2011 3:09 pm
by 91Mav
micka1 wrote:Just doing some research for the new project, and am after some lengths on the c4 auto versus the t700 auto whch will be mated to an atlas transfer so am also chasing the adaptor sizes to the atlas for each if anyone knows it would be great
thanks in advance
G'day micka1,
Advanced Adaptors site says:
C4 + AA Atlas adaptor = 19.9"
T700 + AA Atlas adaptor = 22.336" - 22.966 depending on which year model box
Re: C4 vs T700r4 length
Posted: Wed May 18, 2011 12:17 am
by V.W.Dave
Hey Micka
My offer is still there for bits. I know of a good very cheap C4 and I know where to get a rare th700 with the extra clutchs.
Re: C4 vs T700r4 length
Posted: Thu May 19, 2011 6:14 pm
by PacMan
I dont know about the adaptor but here some length of autos.
c4 432mm/17 inch
th350 553mm/21.75 inch
4L60E 556mm/21.9 inch
4L80E 590mm/23.23 inch
6L80E 590mm/23.23 inch
th700 594mm/23.4 inch
th400 619mm/24.37 inch
Re: C4 vs T700r4 length
Posted: Wed May 25, 2011 7:38 pm
by Modified Toy
What are you going to use it for type of event etc,if you dont need a 4speed use a c4 just as tough.
You can even buy a short outputshaft kit for the c4 to atlas to get the box and transfer shorter,but this removes the govenor off the box so you have to go full manual only.