Outer Limits 4x4 Board

G'day all, been wiring up gti engine in sierra,have got the wiring diagram of this site but it's for US model and I 'm not sure about the two wires for the air bypass (if thats what you call it) it has a big adjustment screw on it and i guess it mounts to the firewall, and hoses run to inlet manifold.It has a red and a yellow wire going to it. I can get the engine to start but dies after about 2 seconds, think it''s something to do with this. It's a bit like when the idle soleniod is not working on a carby model. So this is what I have worked out so far.
From the big round plug, 8 wires ,blue- to thermo fan,brown/ yellow- ign module, black-earth, purple/green-diagnostics plug,pink/white-fuel pump relay, white/black ??????, black/white- ignition,white/blue-ignition. Green rectangle plug, 11 wires, brown- ecu ignition, white/red- alt warning light, blue/red A/c coupler????,yellow/white- temp ,Yellow- this i think goes to the air bypass,need to know what to connect to,red- same as prev, white - constant 12 volts, black/yellow-starter,Violet/yellow- diagnostics, violet- warning light ecu fault.
So theres a couple unknown with ????, the red and yellow for the air , and any thing else there tha looks not right thanks

On the firewall would probably be the air con idle up, so not related to your issue.

Pm jumbo jones he just did this and knows a few tricks with the dizy problem

Can't find jumbo jones to pm

Jimbo Jones: http://www.outerlimits4x4.com/ucp.php?i ... se&u=11697" onclick="window.open(this.href);return false;

Ok Jimbo had an auto electrician do his , and I have an auto elec brother doing mine from a distance, but if anyone else has an idea would much appreciate, save me fully stripping back harness/ time

some info here

http://auszookers.com/index.php?name=Ne ... cle&sid=41" onclick="window.open(this.href);return false;

and here

http://auszookers.com/index.php?name=Ne ... cle&sid=32" onclick="window.open(this.href);return false;

Still no luck, seems to be dropping power to injectors after it starts, from the c3 c4 wires on the computer. Have tried 3 computers and all the same, please help any idea's