Hilux SAS jig for shackle tubes

[Oldhenry]

Hey I was wondering if there was anyone around the Newcastle area that has done a SAS conversion that might have a set of jigs for the shackle tubes in the front of a hilux. I'm about to start setting my lux up on stands and thought it would be the easiest way of getting them set up perfectly.
Thanks guys.

[georgey]

ill have some in about a week if you want to wait?

When i moved the shackles on mine i just measured and drilled,came out perfect,although my diff was further forwards than any other leaf sprung lux ive seen

[Willy Hilux]

Here you go........

http://www.lowrangeoffroad.com/index.ph ... -jigs.html" onclick="window.open(this.href);return false;

[Oldhenry]

ill have some in about a week if you want to wait?

When i moved the shackles on mine i just measured and drilled,came out perfect,although my diff was further forwards than any other leaf sprung lux ive seen

Yeah mats that would be great. I could just measure and drill but I would rather use a set of jigs so everything is perfect. Where abouts are u at.

[Oldhenry]

Here you go........

http://www.lowrangeoffroad.com/index.ph ... -jigs.html" onclick="window.open(this.href);return false;

Thanx mate. I saw them on there but I done really want to wait for 3 or 4 weeks and no one seems to just supply them over here.

[bubs]

Mate I have better luck with measuring than using the jigs.

I mark the hole, i drill through both the inner and outer rail with a long 6mm drill, then come back and drill out the hole with a hole saw.

[Oldhenry]

Bubs do u suggest welding the front hanger on first and then just measure from either side of the hanger bold.
I forgot to write u a msg and say thanx for the gear. It's really top gear u produce mate. Quality is second to nun. Thanks mate

[bubs]

yours is a 88-97 hilux from memory correct?

give me a call tomorrow and i'll run through it.

[Oldhenry]

No worried bubs I'll call when I get a break today. Thanks mate